Attivazione controllo remoto

sudo  apt install -y x11vnc  

x11vnc -storepasswd
sudo mv ~/.vnc/passwd /etc/vncserver.pass
sudo chmod 600 /etc/vncserver.pass

sudo nano /etc/systemd/system/vncserver.service

[Unit]
Description=start vnc at boot
After=multi-user.target
[Service]
Type=simple
ExecStart=/usr/bin/x11vnc -display :0 -auth guess -forever -loop -noxdamage -repeat -rfbauth /etc/vncserver.pass -rfbport 5900 -shared
[Install]
WantedBy=multi-user.target

sudo systemctl enable vncserver
sudo systemctl start vncserver

Note prese da: https://medium.com/@VarshaChahal/kali-setup-on-raspberry-pi-part-3-setup-vnc-server-and-client-18a3f55776de

sudo apt install openssh-server
systemctl start ssh
systemctl enable ssh